Update Your Software Version

Master, Slaves, and Clients should all run the same version of KeyShot Network Rendering.

After an update, the Master will automatically update connected Slaves, but each Client will need to be updated individually.

Update the Master and Slaves

If Update Checking is enabled, the update service in the monitor let you know when a new version is available. But you can also check for updates via the Main menu > Help > Check for Updates.

1. Update the Master - on the computer acting as Master you can update KeyShot Network Rendering in one of the following ways:

2. Launch KeyShot Network Configurator on your Master.

3. Press Close and restart services. Your master will re-start and all existing slaves services will be automatically updated.

Update Clients

Clients need to be connected to a Master in order to receive information about updates. As soon as your Client is connected to a Master, the Monitor will check if your client is running the same version as the Master - if they are not, you will be asked to update and given an update link.
As mentioned above you can also always download and install the latest version from https://www.keyshot.com/resources/downloads/.

For help updating your network, you may contact Luxion Support at support@luxion.com

On this page